Product forms, available sizes and finishes


Product typeFinishesThicknessWidth
Black hot band1U3,00-12,701000-1600
Cold rolled coil2B, 2BB, 2C, 2D, 2E, 2G, 2H, 2J, 2R0,05-3,503-1350
Cold rolled sheet2B, 2BB, 2D, 2E, 2G, 2H, 2J, 2R0,50-3,50350-1350
Hot rolled coil, pickled1C, 1D, 1U5,00-8,0030-1350
Precision strip2R0,05-1,503-649
Chemical composition



Typical 0.3813.31.05
EN 10088-2 0.36-0.42≤1.0013.0-14.50.60-1.00
Mechanical properties



StandardRp0.2Rp1.0RmElongationImpact strengthRockwellHBHV
Product type: Cold rolled coil and sheet
EN 10088-2 ≤ 760 ≥ 15
Product type: Hot rolled coil and sheet
EN 10088-2 ≤ 760 ≥ 15

1)Elongation according to EN standard:
A80 for thickness below 3 mm.
A for thickness = 3 mm.
Elongation according to ASTM standard A2” or A50.

Corrosion resistance


Pitting corrosion resistanceCrevice corrosion resistance

PRE Pitting Resistant Equivalent calculated using the formula: PRE = %Cr + 3.3 x %Mo + 16 x %N
CPT Corrosion Pitting Temperature as measured in the Avesta Cell (ASTM G 150), in a 1M NaCl solution (35,000 ppm or mg/l chloride ions).
CCT Critical Crevice Corrosion Temperature is the critical crevice corrosion temperature which is obtained by laboratory tests according to ASTM G 48 Method F



Physical properties



DensityModulus of elasticityThermal exp. at 100 °CThermal conductivityThermal capacityElectrical resistanceMagnetizable



Standards & approvals



EN 10088-21.4419