Dura 4116
EN 1.4116

General characteristics

Similar to 1.4110, but with elevated wear resistance. Applied especially for cutting instruments which undergo partial hardening for excellent wear resistance of functional surfaces.

Typical applications

  • Cutting instruments


Product forms, available sizes and finishes


Product typeFinishesThicknessWidth
Black hot band1U4,00-8,001000-1600
Cold rolled coil2B, 2BB, 2C, 2D, 2E, 2G, 2H, 2J, 2R0,05-4,003-1350
Cold rolled sheet2B, 2BB, 2D, 2E, 2G, 2H, 2J0,50-4,00350-1350
Hot rolled coil, pickled1C, 1D, 1U5,00-8,0030-1350
Precision strip2R0,05-1,503-649
Chemical composition


The chemical composition is given as % by weight.

Typical 0.5014.40.6V:0.11
EN 10088-2 0.45-0.55≤1.014.0-15.00.50-0.80V:0.10-0.20
Mechanical properties



StandardRp0.2Rp1.0RmElongationImpact strengthRockwellHBHV
Product type: Cold rolled coil and sheet
Typical (thickness 1 mm)390430640
EN 10088-2 ≤ 850 ≥ 12
Product type: Hot rolled coil and sheet
Typical (thickness 4 mm)4104906702290
EN 10088-2 ≤ 850 ≥ 12

1)Elongation according to EN standard:
A80 for thickness below 3 mm.
A for thickness = 3 mm.
Elongation according to ASTM standard A2” or A50.

Corrosion resistance


Pitting corrosion resistanceCrevice corrosion resistance

PRE Pitting Resistant Equivalent calculated using the formula: PRE = %Cr + 3.3 x %Mo + 16 x %N
CPT Corrosion Pitting Temperature as measured in the Avesta Cell (ASTM G 150), in a 1M NaCl solution (35,000 ppm or mg/l chloride ions).
CCT Critical Crevice Corrosion Temperature is the critical crevice corrosion temperature which is obtained by laboratory tests according to ASTM G 48 Method F



Physical properties



DensityModulus of elasticityThermal exp. at 100 °CThermal conductivityThermal capacityElectrical resistanceMagnetizable



Standards & approvals



EN 10088-21.4116