Outokumpu stainless steel finder

Show search tips Hide search tips

You may search with any combination of the following search options…
Outokumpu grade names - ex: both new and old names work! e.g. 430, Moda 430, Moda 4016
Product category - ex: classic, pro, core
Grade family - ex: ferritic, duplex, austenitic

Open Filters Close Filters

units of measurement

General Characteristics

Product ranges:

Grade family:

Corrosion Resistance

Pitting Corrosion resistance (PRE)

Mechanical Properties

0.2% Proof strength (R_p0.2) MPa at room temperature

Tensile strength (R_m) MPa at room temperature

Elongation (A) % at room temperature

Elongation (A₈₀) % at room temperature

Physical Properties

Magnetizable

Thermal Conductivity W/m°C

Thermal Expansion at 100°C

Maximum service temperature °C

Close Filters

Open viewing options Close viewing options

Show product name:

Properties displayed:

Show Outokumpu typical values for:

PRE Pitting Resistant Equivalent calculated using the formula: PRE = %Cr + 3.3 x %Mo + 16 x %N CPT Corrosion Pitting Temperature as measured in the Avesta Cell (ASTM G 150), in a 1M NaCl solution (35,000 ppm or mg/l chloride ions). CCT Critical Crevice Corrosion Temperature is the critical crevice corrosion temperature which is obtained by laboratory tests according to ASTM G 48 Method F

= click to compare products

Compared products

All other products

Outokumpu name	Grade family	C	N	Cr	Ni	Mo	Other

Sanicro® 35	Austenitic	0.02	0.27	27.0	35.5	6.4
Moda 430/4016	Ferritic	0.05		16.2
Moda 439/4510	Ferritic	0.02		17.0			Ti:0.80
Moda 430Ti/4520	Ferritic	0.02		16.2			Ti:0.45
Moda 4589	Ferritic	0.05		14.0	1.7	0.3	Ti:0.39
Moda 410L/4003	Ferritic	0.02		11.5	0.5
Moda 409/4512	Ferritic	0.02		11.5	0.2		Ti:0.30
Core 201LN/4372	Austenitic	0.02	0.16	16.2	4.1		Cu:0.75 Mn:6.6
Core 201/4372	Austenitic	0.05	0.08	16.1	3.6		Mn:6.6
Core 304/4301	Austenitic	0.04		18.1	8.1
Core 304L/4307	Austenitic	0.02		18.1	8.1
Core 304L/4306	Austenitic	0.02		18.2	10.1
Core 321/4541	Austenitic	0.04		17.3	9.1		Ti:0.40
Core 304LN/4311	Austenitic	0.02	0.14	18.5	9.2
Core 305/4303	Austenitic	0.04		17.7	12.5
Core 301/4310	Austenitic	0.10		17.0	7.0
Core 301LN/4318	Austenitic	0.02	0.14	17.7	6.5
Core 347/4550	Austenitic	0.05		17.5	9.5		Nb:0.6
Core 441/4509	Ferritic	0.02		17.6			Nb:0.30 Ti:0.14
Core 4622	Ferritic	0.02	0.02	21.0			Cu:0.4 Nb:0.35 Ti:0.15
Supra 316/4401	Austenitic	0.04		17.2	10.1	2.1
Supra 316L/4404	Austenitic	0.02		17.2	10.1	2.1
Supra 444/4521	Ferritic	0.02		18.0		2.0	Nb:0.40 Ti:0.13
Supra 316plus	Austenitic	0.02	0.19	20.3	8.6	0.7
Supra 316L/4432	Austenitic	0.02		16.9	10.7	2.6
Supra 316/4436	Austenitic	0.04		16.9	10.7	2.6
Supra 316L/4435	Austenitic	0.02		17.3	12.6	2.6
Supra 316Ti/4571	Austenitic	0.04		16.8	10.9	2.1	Ti:0.40
Forta LDX 2101	Duplex	0.03	0.22	21.5	1.5	0.3	Cu:0.3 Mn:5.0
Forta DX 2304	Duplex	0.02	0.10	23.0	4.8	0.3	Cu:0.30
Forta LDX 2404	Duplex	0.02	0.27	24.0	3.6	1.6	Cu:0.40 Mn:3.0
Forta DX 2205	Duplex	0.02	0.17	22.4	5.7	3.1
Forta SDX 2507	Duplex	0.02	0.27	25.0	7.0	4.0
Forta SDX 100	Duplex	0.02	0.27	25.4	6.9	3.8	Cu:0.70 W:0.70
Forta H400	Austenitic	0.04	0.20	17.5	4.0		Mn:6.8
Forta 430/4016	Ferritic	0.05		16.2
Forta 304/4301	Austenitic	0.04		18.1	8.1
Forta 304L/4307	Austenitic	0.02		18.1	8.1
Forta 301/4310	Austenitic	0.10		17.0	7.0
Forta 301LN/4318	Austenitic	0.02	0.14	17.7	6.5
Forta 316/4401	Austenitic	0.04		17.2	10.1	2.1
Forta 316L/4404	Austenitic	0.02		17.2	10.1	2.1
Forta 316plus	Austenitic	0.02	0.19	20.3	8.6	0.7
Forta 316Ti/4571	Austenitic	0.04		16.8	10.9	2.1	Ti:0.40
Ultra 317L	Austenitic	0.02		18.2	11.6	3.1
Ultra 904L	Austenitic	0.01		19.8	24.2	4.3	Cu:1.4
Ultra 254 SMO	Austenitic	0.01	0.20	20.0	18.0	6.1	Cu:0.7
Ultra 6XN	Austenitic	0.01	0.20	20.5	24.8	6.5	Cu:0.6
Ultra 654 SMO	Austenitic	0.01	0.50	24.0	22.0	7.3	Cu:0.50 Mn:3.5
Ultra Alloy 825	Austenitic	0.010		23.0	39.0	3.2	Al:0.1 Cu:1.7 Mn:0.8 Si:0.35 Ti:0.75
Ultra 725LN	Austenitic	0.01	0.12	25.0	22.3	2.1
Dura 4024	Martensitic	0.16		13.2
Dura 420/4021	Martensitic	0.20		13.0
Dura 420/4028	Martensitic	0.30		12.5
Dura 420/4034	Martensitic	0.45		13.7
Dura 4122	Martensitic	0.41		16.1		1.0
Dura 4110	Martensitic	0.50		14.8		0.6
Dura 4116	Martensitic	0.50		14.4		0.6	V:0.11
Therma 253 MA	Austenitic	0.09	0.17	21.0	11.0		Ce:0.05 Si:1.6
Therma 310S/4845	Austenitic	0.05		25.5	19.1
Therma 4828	Austenitic	0.05		19.3	11.2		Si:1.9
Therma 309S/4833	Austenitic	0.06		22.3	12.3
Therma 314/4841	Austenitic	0.06		24.3	19.2		Si:1.7
Therma 4713	Ferritic	0.06		6.5			Al:0.8 Si:0.8
Therma 4724	Ferritic	0.07		12.5			Al:0.9 Si:1.0
Therma 304H/4948	Austenitic	0.05		18.1	8.3
Therma 321H/4878	Austenitic	0.05		17.3	9.1		Ti:0.40

Stainless Steel Finder

Compared products

All other products

Contact us