Dura 4116
EN 1.4116

View Dura range datasheet

General characteristics

Similar to 1.4110, but with elevated wear resistance. Applied especially for cutting instruments which undergo partial hardening for excellent wear resistance of functional surfaces.

Typical applications

  • Cutting instruments

 

Product forms, available sizes and finishes

Flat

Product typeFinishesThicknessWidth
Cold rolled coil and sheet2B0,80-4,50≤ 1250
Hot rolled coil and plateHot rolled white5,00-6,00≤ 1250
Chemical composition

 

The chemical composition is given as % by weight.

StandardGradeCMnCrNiMoNOther
TypicalDura 41160.5014.40.6V:0.11
EN 10088-21.41160.45-0.55<114.0-15.00.50-0.80Si:<1 P:<0.040 S:<0.015 V:0.10-0.20
Mechanical properties

 

 

StandardGradeRp0.2Rp1.0RmElongationImpact strengthRockwellHBHV
  MPaMPaMPa%J
Product type: Cold rolled coil and sheet
Typical (thickness 1 mm)Dura 411639043064089HRB
Product type: Hot rolled coil and sheet
Typical (thickness 4 mm)Dura 41164104906702290

1)Elongation according to EN standard:
A80 for thickness below 3 mm.
A for thickness = 3 mm.
Elongation according to ASTM standard A2” or A50.

Corrosion resistance

 

Pitting corrosion resistanceCrevice corrosion resistance
PRECPTCCT
16<10<0

PRE Pitting Resistant Equivalent calculated using the formula: PRE = %Cr + 3.3 x %Mo + 16 x %N
CPT Corrosion Pitting Temperature as measured in the Avesta Cell (ASTM G 150), in a 1M NaCl solution (35,000 ppm or mg/l chloride ions).
CCT Critical Crevice Corrosion Temperature is the critical crevice corrosion temperature which is obtained by laboratory tests according to ASTM G 48 Method F

 

 

Physical properties

 

 

DensityModulus of elasticityThermal exp. at 100 °CThermal conductivityThermal capacityElectrical resistanceMagnetizable
kg/dm3GPa10-6/°CW/m°CJ/kg°CµΩm
7.721510.5304600.65Yes

Fabrication

 

 

Standards & approvals

 

 

StandardDesignation
EN 10088-21.4116